
Modules are normally shipped standing on edge in a single carton on a wooden pallet, which spreads the weight through the frames rather than the glass. A kit includes the pallet, base and top boards, a corrugated carton or wrap, a top cover, corner boards, PET straps and stretch film. Wood must be heat-treated and stamped to ISPM 15 for international shipping; fumigated or engineered-wood pallets are alternatives where accepted.
Pallet size follows the module format: a 2382 × 1134 mm module typically packs 33–36 per pallet, and a 40-foot high-cube container holds roughly 620–720 modules depending on frame height and glass build. Specify pallet load rating, board moisture content, carton burst strength and print layout, and make sure the kit has passed a drop and vibration test with your modules. Priced per kit.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.