
Dual-glass modules split the mechanical load between two thinner panes bonded by the encapsulant, so each sheet can drop to 2.0 mm. That saves weight compared with 3.2 mm front glass plus rear glass, and places the cells near the neutral axis of the laminate, which reduces cell stress and micro-cracking under load.
Glass this thin cannot be fully tempered on standard lines, so it is heat-strengthened (semi-tempered): stronger than annealed glass but breaking into larger pieces. Flatness is the critical quality point, because bow and roller wave in 2.0 mm glass lead to bubbles, cell breakage and edge delamination during lamination. Specify bow limits, AR coating transmittance and edge finish, and handle the glass with suction lifters and full-surface support. Used together with matching 2.0 mm rear glass in 2382 × 1134 mm or 2384 × 1303 mm formats.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.