
Interconnect wire carries current from one cell to the next in a string. Flat ribbons have given way to round wire: on SMBB cells with 16–20 busbars, wire of 0.26–0.30 mm diameter reflects some light back onto the cell from its curved surface and shortens the current path along each finger. The core is high-conductivity soft copper, coated with 10–20 µm of tin-based solder, either tin-lead or a lead-free alloy.
In 0BB designs the printed busbars are removed and finer wires, often below 0.25 mm, are laid directly across the fingers and fixed by a polymer film, adhesive spots or the encapsulant during lamination. HJT and some BC cells need low-melting-point solder such as tin-bismuth because the cells cannot take standard soldering temperatures. Choose wire diameter, coating alloy and yield strength together with your stringer settings; wire that is too stiff raises cell breakage. Supplied on spools, priced per kilogram and adjusted for copper and tin prices.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.