
In half-cell modules the bus ribbons exit at three points along the module's centre line, so a split junction box places one small box over each outlet instead of a single large box. Each box contains a bypass diode, usually a Schottky type, which conducts when part of the module is shaded or a cell is damaged, limiting hot-spot heating and power loss. The two outer boxes carry the module cable leads.
Current rating must cover the module's short-circuit current plus bifacial gain with margin; for modern TOPCon modules with Isc around 14–18 A, 25–30 A boxes are typical. Check diode junction temperature at rated current (the IEC 62790 thermal test), IP68 sealing, 1500 V DC rating, terminal design for your ribbon width, and compatibility with your potting silicone. Assembly lines usually solder the ribbons, bond the box with silicone, then pot it.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.