
This is the factory-side component: a positive and a negative lead, cut and stripped at one end for the junction-box terminals and fitted with MC4-type male and female connectors at the other. It is different from the loose connector pairs installers crimp in the field. Cable is 4 mm² H1Z2Z2-K to EN 50618, rated 1500 V DC. Lead length is set by how the modules will be strung: short leads such as +300 / −300 mm suit leapfrog wiring of half-cell modules in portrait, while landscape mounting usually needs 1,100–1,400 mm.
Check connector rated current (at least 30 A for high-current modules), IP68 mated sealing, crimp pull-out force and contact resistance, and the cable's halogen-free and UV ratings. Intermating connectors from different manufacturers is discouraged under IEC 62852, so tell your customers which connector family is fitted. Supplied as sets (one positive and one negative lead) in bundles.
Phosphorus-doped Czochralski ingot, cropped and squared for M10, G12R or G12 wafering, with resistivity and lifetime data per piece.

Diamond-wire-cut N-type monocrystalline wafer, about 130 µm thick, in the near-square M10 format used for TOPCon and HJT cells.

Rectangular 210R wafer for the 2382 × 1134 mm module format: more power per module while staying within standard container and handling limits.

Full-size 210 mm square N-type wafer for high-power utility modules above 700 W, usually cut into half or third cells.

Gallium-doped P-type PERC cell, about 23.3–23.6 % efficient, for cost-driven modules and replacement production on existing lines.

Mainstream N-type cell in M10 or G12R format, around 26 % efficient with 80–85 % bifaciality, for glass-glass and glass-backsheet modules.

Low-temperature N-type cell with amorphous-silicon passivation, high bifaciality and the best temperature coefficient among mainstream technologies.

Cell with all contacts on the rear and an unshaded front, the highest-efficiency mass-produced option at 26.5–27 %+, suited to premium rooftop modules.

Screen-printing pastes for TOPCon, PERC and HJT cells, including silver-aluminium, fine-line silver, low-temperature and silver-coated copper grades; price indexed to silver.