All electrical contacts moved to the rear of the cell. No front busbars, more light captured and the highest module efficiencies on the market.

In an interdigitated back-contact (IBC) cell, both the positive and negative regions and their metal fingers are arranged in alternating strips on the rear side. The front surface carries no grid lines at all, so no light is lost to shading and the module has a uniform, all-black appearance.
Back contact can be combined with different passivation schemes. LONGi's HPBC (Hybrid Passivated Back Contact) and Hi-MO 9 modules use it on N-type wafers; Aiko's ABC (All Back Contact) is another high-volume variant. Production module efficiencies of 23.5–24.8 % are now available, the highest of any commercial silicon product.
Back-contact cells historically had lower bifaciality (60–70 %) because the rear is densely metallized, so their advantage is strongest on rooftops, carports and any project where area is limited and every watt per square meter matters. Newer generations have narrowed this gap.
Manufacturing is more complex than TOPCon, requiring precise laser patterning and alignment, so back-contact modules usually command a premium. On a constrained commercial roof, however, the extra kilowatts installed usually more than pay for that premium.

Crystalline N-type wafer sandwiched between thin amorphous-silicon layers, with the best temperature coefficient among silicon technologies.

Modules that also convert light reaching their rear side, adding 5–25 % energy depending on ground albedo and mounting height.

Cells laminated between two sheets of tempered glass for higher durability, lower degradation and 30-year warranties.

Cells laser-cut in half to halve current per string, reduce resistive losses and improve shade tolerance.

Cell strips overlapped like roof shingles and bonded with conductive adhesive, leaving no gaps or ribbons and a high active area.

Semiconductor layers a few micrometers thick deposited on glass. Excellent heat and diffuse-light behavior, lower efficiency per area.

Blue, multi-grain silicon modules that dominated until about 2018, now discontinued by Tier-1 makers.

Glass-free laminates for roofs with low load capacity, curved surfaces, vehicles and marine use.